Mounting instructions torroTIMBER® Vlonderplanken

Mounting the floor is very simple using a special developed clip-on system. Basically you first construct a sub relief of joist-parts (lengthways) with a spacing of, for the boards of 193mm (7.6in) a space of 500 mm (1.64 feet). For the boards of 145mm (5.7in) use a space of 350mm (13.8in). The bottoms need to be screwed on to a (concrete) stone ground or in case of an increased terrace on a wooden construction screwed on by wooden bottoms.

Make sure that you will always fasten the outmost sub relief on the floor with a stroke plug. In case of a roof garden, we advise you to use an extra sub relief along the outside.

The shelves need to be 5mm per meter (0.19 in per 39 in) off the wall. This means a length of 5 meters (16.4 feet) has to be off the wall 2 to 3 cm (0.8 to 1.2in).

Important points:

• Shelves always need to slope down with 2%.
• All bottoms should be placed all separately with a space of 7mm (0.28 in) between each shelve.
• Please take into account a wastage of 5% to 10% .
• 145 mm (5.7in) shelves bottoms each 350mm (13.8in)
• 193 mm (7.6in) shelves bottoms each 500mm (1.64 feet)
• Patios with a length over 6 meters (19 feet) have to be dilated.
• Grade 1 cm per meter (0.39in per 3.28 feet).
• Bottoms needs to be screwed on to (concrete) stone floors.
• In case of a roof garden please get in touch with us.
• Distance from front side, shelves - wall: 3 cm (0.1feet)

Please do not hesitate to get in touch with us if you have any questions about the points mention above.

• You can download the mounting instructions here.
• Brochure torroTIMBER® Vlonderplanken